ILive ISWFV387G Manuel du propriétaire télécharger pdf (Page 10)

4. Connect to Wi-Fi

To use the speaker’s Wi-Fi features, the speaker and your mobile device must both

be connected to a Wi-Fi network. The app will guide you through the process, just

follow the on-screen instructions and have your network password ready.

After the initial connection, the speaker will remember the Wi-Fi network and

automatically connect to it when it is in Wi-Fi Mode. If the speaker should become

disconnected or will not connect normally, repeat the steps below or try the

Alternative Connection Method (See pg. 12).

Initial Wi-Fi Connection

Note: If you have a dual band wireless router, be sure to connect using

the 2.4GHz band.

1. Press and hold the Power button to power on the speaker. The Mode/

Connection LED may ash multiple colors after rst powering on. This is

normal, please wait for the Mode/Connection LED to begin slowly ashing white,

indicating the speaker is in Wi-Fi Standby Mode.

2. Press and hold the Pair (WPS) button on the speaker.

3. Open the iLive Wi-Fi app on your device and press “Add Device”. Follow the

on-screen prompts and enter your Wi-Fi password (Image A, B, right).

4. The app will display it’s progress as it congures the speaker and your Wi-Fi

network. When the speaker and your device are successfully connected to Wi-Fi,

a voice will announce the connection and the Mode/Connection LED will turn

solid white. Press “Finished” to start using the app (Image C, D, right).

SETUP

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

ILive ISWFV387G Manuel du propriétaire Page 10